siteear.blogg.se

Note: This mixture has bleaching properties hence can cause discoloration in colored grout.

Afterward, scrub the stained surface with a soft brush or pad. Spray the mixture directly on the stain and leave for 10 minutes. Prepare a solution consisting of a mixture of water and hydrogen peroxide in equal proportions, and put it in a spray bottle. Using Hydrogen Peroxide: This is recommended for floors that have uncolored grout.A water-based solution of mild detergent or soap can be used to rub out the stains. Rubbing out the Stains: This requires a clean and soft sponge or a scrub with non-metallic bristles.A soft towel or cloth should be used for this step. This would prevent any material to seep into the pores. Wiping-Off the Spills: Immediately remove any spill as soon as it comes in contact with the surface. This blocks the pores and prevents stains from causing any damage to the floor made of slate stone. Follow the directions given on the sealer container to uniformly apply the sealer on the floor. Using a Sealer: At numerous hardware stores and with stone retailers, natural stone sealers are easily available.In addition to grime and stain removal, this saves you from indulging in much strenuous and deeper cleaning later. Repeat the Process at Every Two or Three Months: Slate is soft material and requires to be cleaned at regular intervals.Note: Though an expensive option, slate oil is a better choice than teak oil. In a small amount, teak oil will ensure deep cleaning, but the quantity should be as low as it should not start getting into the pores. Application of Teak Oil: With the help of a soft cloth, apply an extremely thin layer of teak oil on the completely dried floor.Thereafter, allow the slate floor to get air-dried. Gently wipe off as much water as possible with the cloth, so as to prevent seepage into the tiny pores. Drying the Floor: Choose a cloth with soft fiber for drying.If at any point of time the mop seems to start leaving dirt marks or debris on the floor, discard the detergent solution and make a new one.This mop has the ability to extract extra dirt and condensation. Occasionally rinse the mop to prevent any debris getting stuck into it. Move the mop by gently making smooth strokes against the floor. Re-Mop the Floor: Dip the mop in the detergent solution and wring out extra water.Note: One can also go for a specialized slate floor cleaner available in the market for cleaning slate floor tiles. The choice of detergent should the one that is meant for delicate clothing. Preparing a Water-Based Solution of Detergent: In a bucket, mix approximately one-fourth cup of any mild detergent with a gallon of water.Avoid moving the mop back and forth as this will bring back the dust onto the floor. Move the mop in a single direction to wipe dust and debris off the floor. Mop the Floor: A dust mop, which is not oil-based, should be used for this step.Remove debris on the floor by gently moving the broom over the surface. Floor Sweeping: Since slate is a soft material, use a broom with only soft-bristle as.Keep reading to learn about the two processes in detail: Mopping the Slate Floor: It is, therefore, suggested to use soft mops for cleaning slate floor tiles and follow a specified guideline for removing stains. In comparison to other natural stones like granite and marble, slate is relatively delicate and more susceptible to damage from hard scrubs and acids. Regular maintenance and care are required to preserve its captivating looks as slate is a highly porous natural stone and attracts stains easily. Slate floors are undoubtedly amazing and are a treat to eyes.